[email protected]

+91-9999877733

Trident TR 603 Drill-Tap Center 2011

  1. Home
  2. Tapping Center
  3. Trident TR 603 Drill-Tap Center 2011

  • Standard spindle speed
    BT#30 60~10,000 min-1
    BT#40 60~8,000 min-1
  • Optional spindle speed
    BT#30 12,000 ; 15,000 ; 24,000 min-1
    BT#40 10,000 ; 12,000 ; 15,000 min-1
  • Rigid tapping 4,000 min-1
  • Spindle nose taper BT-30, BT-40
  • 3 axes rapid traverse
    BT#30 X, Y:48 M/min, Z:60 M/min
    BT#40 X, Y, Z:48 M/min
  • Fully enclosed heat isolated electric cabinet
  • High speed arm type ATC system T.-T:1.4 sec (BT-30)
  • Directly coupled spindle drive system
………………………………………………………………………………………………………………………..
Machine Specifications

Model

TR-60 Series
60E60D60A603603A
TRAVEL
X-Travelmm600
Y-Travelmm400
Z-Travelmm400500350430
Table to Spindle Nosemm150~550150~650150~500150~580
TABLE
Table Sizemm700×420
Max. Tablekgs250
T-Slotmm14x100x4
SPINDLE
Speedrpm800010000
Max. Tapping Speedrpm30004000
Tapermm7/24 NO:407/24 NO:30
TransmissionmmBeltDirect drive
FEED RATE
Rapid Speed G00)M/min48/48/4848/48/60
Cutting feedrate (G01)mm/min10000
MAGAZINE
Tool ShankBT# 40BT# 30
Change MethodArmlessArmlessArmArmlessArm
Capacity121424+11220+1
Max. Lengthmm250200
Max. Dia.kgs1008010063
Max. Tool Weightsec342.53
Time (T to T)sec1.82.21.41.5
Time (C to C)sec2.73.11.81.9
MOTOR
X-Axiskw1.5(Mitsubishi) / 1.2(Fanuc)
Y-Axiskw1.5(Mitsubishi) / 1.2(Fanuc)
Z-Axiskw3.0(Mitsubishi) / 3.0(Fanuc)
Spindlekw5.5/3.77.5/5.53.7/2.2
MACHINE SPECIFICATIONS
W x D x Hcm165x252x280190x252x280165x252x260165x252x280
Net Weight

kgs

3250350032503250
………………………………………………………………………………………………………………………..
NC Specifications
MitsubishiFanuc
M70-VBM70-VAM80-VBM80-VAM720-VS0i-MF(P3)0i-MF(P1)
CPU64 bit32 bit
Max. Controlled Axes9119111269
Max. Simultaneous Axes4444444
Program Storage Length512K512K512K512K512K512K512K
Macro Variables Common700700400400700700700
Tool Offset Sets400400400400400400400
Conversational Programming0000000
Display8.4″ TFT LCD10.4″ TFT LCD8.4″ TFT LCD
Mulit-Language Display000
Servo Motor with ABS. Encoder000
Memory Card Front-Loading000
Ethernet000
High Speed And Accuracy Machining CodeG05.1 Q1G05 P10000G05 P10000SSSSSSG05.1 Q1
RS-232 Interface00
Toolpath Simulation03D0
Handwheel Feed Program Simulation0X
Program Buffer Correction0X
○ Standard 　　× None 　　
………………………………………………………………………………………………………………………..
Standard Machine Features
  • Spindle air blow device
  • Work light (PL light)
  • Tool coolant system
  • Leveling bolts and pads
  • Screw-type chip removing device
  • Automatic lubrication system
  • Tool kit and tools
  • Dual-color LED alarm light
  • TFT LCD monitor
Optional Accessories
  • 12,000 RPM spindle
  • 15,000 RPM spindle (except TR-60E)
  • 24,000 RPM spindle (TR-603, TR-603A only)
  • 10,000 RPM spindle (BT#40 only)
  • Increased motor power
  • Extra low inertia spindle motor
  • High pressure coolant through spindle (20bar): (except TR-60E)
  • Automatic tool length measurement with breaking detection
  • Automatic door
  • Transformer; regulator
  • Workpiece air blow system
  • 4th axis
  • 5th axis
…………………………………………………………………………………………………………..
Dimensions
ABC
TR-60E165025202800
TR-603165025202600
TR-60A190025202800
TR-603A165025202800
TR-60D165025202800

* All specifications, dimensions and design characteristics are subject to change without prior notice.

Category:
Enquiry
Cart